On Stage Visuals
Providing Quality Products & Service for the Entertainment Community Since 1985


DJ Lighting • Stage Lighting • Club Lighting • Commercial Lighting • Sound Systems • Event Production

Mixing Consoles - Live

Item Description

Allen & Heath - GL2200-32
Click for larger image.
Allen & Heath - GL2200-32 Mixer - 32ch x 4 x 2, 6 aux, w/o case

Features a 4-band semi-parametric EQ, 8 additional inputs on every frame size, and expandability in a dual-function console. For true flexibility, using only a few front-panel switches, the whole console becomes a dedicated monitor board. Couple that with its ability to selectively switch only as many of these outputs as needed and the GL2200 is truly in a class of its own. Includes 2 fully featured stereo inputs along with 2 stereo effects returns. Each stereo input features the same wide-ranging mic preamp as the mono inputs, a 4-band EQ, and 6 aux sends. Also features input meters on all 32 channels, 100mm faders, individual channel-by-channel phantom power switches, and more. 77 lbs.

  • 32 channels
  • 4-band semi-parametric EQ
  • 8 additional inputs on every frame size
  • Expandability
  • Whole console can become a dedicated monitor board
  • 2 fully featured stereo inputs
  • 2 stereo effects returns
  • 4-band EQ, 6 aux sends, and input meter per channel
  • 100mm faders
  • Channel-by-channel phantom power switches

  • Allen & Heath - GL2200-32 user manual (pdf)

Allen & Heath MixWizard
Click for larger image.
Allen & Heath MixWizard WZ4 16:2

  • 19" Rack mountable
  • 16 mic/line inputs with balanced XLR/TRS jack, insert and direct output
  • 100mm faders
  • 4 band EQ with 2 swept mids
  • 6 Aux sends – 2x pre fade / 2x switched / 2x post fade*
  • 2 Stereo returns
  • Dedicated mono output fader – can be switched to provide an L+R mono feed for a centre or fill speaker, or sub bass feed
  • Independent A-B output for 2-track recording, monitor foldback, speaker fills etc
  • Tri-colour, 12 segment bargraph metering
  • Twin FX engines with 20 studio quality FX presets
  • +48V Phantom Power
  • Signal and Peak LEDs
  • Lamp socket

Mackie - DFX-6
Click for larger image.
Mackie - DFX-6 - Six channel mixer

  • Six-channel on-stage mixer with EMAC digital effects
  • 12-segment stereo LED metering
  • 5-band stereo assignable graphic EQ with bypass switch
  • EMAC 32-bit digital stereo effects with footswitch bypass, and Level Set LED
  • Aux 1/monitor send with level control
  • Aux 2/effects send with level control
  • Effects-to-monitor control
  • 60mm main mix faders
  • Two 60mm stereo Aux Return faders with mute switches
  • Break switch for intermissions
  • Balanced XLR and 1/4" stereo main outputs
  • RCA CD/Tape inputs and Tape outputs
  • Vocal Eliminator circuit for CD/Tape
  • Master +48 V phantom power switch with LED indicator
  • Headphone output with level control
  • Power LED indicator

  • Mackie - DFX-6 user manual (pdf)

Behringer - DDX3216
Click for larger image.
Behringer - DDX3216

Fully Automated 32-Channel 16-Bus Digital Mixing Console

  • State-of-the-art, 32-channel mixing console with 16 internal busses and 8 aux sends for extreme routing flexibility
  • Fully featured static and dynamic automation functions
  • High-power floating-point DSP technology and high-resolution 24-bit A/D and D/A converters ensure virtually unlimited internal dynamic range
  • 12 ULN (Ultra-Low Noise) microphone inputs with analog inserts and switchable phantom power
  • 4-band, fully parametric equalizer, low-cut filter, gate, compressor and phase inverter on all 32 channels plus additional delay function on the first 16 channels
  • 4 built-in effects processors with first-class algorithms, such as reverb, chorus, flanger, phaser, delay, pitch shifter, tremolo, lo-fi, LFO filter, ring modulator and more
  • 17 ultra-precise, low-noise, 100-mm, motorized faders and freely configurable level meters
  • Channel encoders with LED rings control any of nine selectable parameters per channel
  • 4 freely assignable analog outputs on balanced 1/4" TRS connectors
  • Internal input/output patchbay for easy routing of complex signal configurations
  • Large, easy-to-read, graphic LCD display with adjustable contrast
  • Synchronization to SMPTE, MTC or internal clock
  • Two slots for installation of optionally available digital interfaces based on AES/EBU (8 I/O), ADAT® (16 I/O) or TDIF formats (16 I/O)
  • MIDI and RS232 connectors allow communication with a PC or numerous other devices
  • Extensive MIDI functions (MMC, program changes, control changes, MIDI sys-ex)
  • PC card slot for saving/loading various libraries and other settings
  • Serial cable for data transmission/management included and free PC software downloadable at www.behringer.com

  • Behringer - DDX3216 user manual (pdf)

Ramsa - WR-S 4412
Click for larger image.
Ramsa - WR-S 4412

12 Channel, 4 bus Audio Mixer

The RAMSA WR-S4400 series Sound Reinforcement and Recording consoles have been designed and built based on the same technology and quality of RAMSA's high-end professional mixing consoles. Whether you are mixing sound for a live band, recording studio, A/V production studio, or night club, the RAMSA WR-S4400 series can enhance the quality of your mix.

  • The distributed grounding system used in RAMSA mixing consoles reduces hum, crosstalk, and other sound degrading characteristic to an absolute minimum. All channel inputs and AUX Microphone Inputs are electronically balanced, as well as the Group, Master L/R, Matrix, and Monitor outputs.
  • The "AUX send Multiplier" increases the number of sends available for routing signals to effects devices.
  • A new high-precision long-stroke carbon fader has been developed for the WR-S4400 series mixer.
  • The mono Input Head Amplifier has a continuously variable trim range 64dB, enabling it to accept any Mic or Line source with a nominal level between -60dB and +4dB at the A-input, or -54dB and +10dB at the B-input. A slow-start phantom power circuit on each mono inputs channel eliminates pop noises which occur when it is turned on.
  • Rental includes road case.

  • Ramsa WR-S4412 user manual (pdf)

Ramsa - WR-S 4424
Click for larger image.
Ramsa - WR-S 4424 - 24 channels x 4 sub x 2 main out, 4 aux, w/Case

  • 24 mono input channels with A/B source, 3 band EQ (swept mid)
  • Direct out on each channel and individual 48V phantom power selection
  • 4 Group Masters
  • Left/Right Masters
  • 4 x Aux Send (2 selectable as pre-fade or post-fade)
  • ASM Aux Send Multiplier system – Gives greatly increased capacity
  • 4 x Stereo Aux Return
  • Mic input – balanced XLR, Line – 1/4" Jack , insert points – TRS 1/4" Jack
  • Sub input – 1/4" Jack, Aux return – 1/4" Jack
  • Group & Master output – XLR, Aux out, Direct output – 1/4" Jack, Record – RCA Phono
  • Weight: 60.6 lbs.

  • Ramsa WR-S4424 user manual (pdf)

Tapco - Mix220FX
Click for larger image.
Tapco - Mix220FX

8-channel Mixer with 3-band EQ, Built-in 20-bit Effects, and Phantom Power

  • 4 precision Mono Mic/Line inputs and 2 Stereo Line
  • Built-in 20-bit digital multi-effects include reverb, delay, chorus, and more with 256 presets
  • 2 Aux Sends for effects and stage monitors
  • 2 Stereo Aux Returns for effects and playback devices
  • Headphone and Control Room outputs plus RCA Tape inputs/outputs
  • +48v Phantom Power for use with condenser microphones
  • Tape input/output
  • Alt 3/4 output
  • Built-in power supply

  • Tapco - Mix220FX user manual (pdf)

Tapco - Mix260FX
Click for larger image.

Tapco Mix260FX

12 channel Mixing Console with 20-bit digital multi-effects processor, Phantom Power

This Tapco mixer features quality 20-bit digital effects with 256 fantastic-sounding presets, including a variety of clean sounding reverbs and delays, plus chorus, flange, tremolo and rotary effects. The Mix FX also adds 60mm linear faders with mute and solo controls for the optimum hands-on Mix flexibility. It adds channel inserts, plus two busses with flexible channel/main mix assignment, subgroup master faders and discrete sub outputs.

  • 12-Channel Mixer
  • 4 precision Mono Mic/Line inputs and 4 Stereo Line
  • Built-in 20-bit digital multi-effects include reverb, delay, chorus, and more with 256 presets
  • 2 Aux Sends for effects and stage monitors
  • 2 Stereo Aux Returns for effects and playback devices
  • Headphone and Control Room outputs plus RCA Tape inputs/outputs
  • +48v Phantom Power for use with condenser microphones

  • Tapco - Mix260FX user manual (pdf)
Call OSV for rental pricing info - Local: 517.393.7800 - Toll Free: 800.373.5483

Return to Rental Main Page

• Privacy Policy: On Stage Visuals values and respects our client's right to privacy. We do not and will not sell or share any of your information with anyone.
• Disclaimer: On Stage Visuals is not liable for misspellings, errors (including prices), or incorrect manufacturer's specifications for  products listed on this website.
• Website contents © On Stage Visuals.  All rights reserved.  Prices are subject to change without notice.